(810) 750-1996 PH
Fenton Fitness (810) 750-0351 PH
Fenton Physical Therapy (810) 750-1996 PH
Linden Physical Therapy (810) 735-0010 PH
Milford Physical Therapy (248) 685-7272 PH

Learn more about Rehab, Sports Medicine & Performance

ups

Progression Know How

Carries, Crawls, and Core

If I could kill a word it would be “workout”.  People who are into fitness love to talk about working out, but seldom do you hear people talk about training or practicing movements.  “Workout” tends to infer any form of structured exercise with the sole purpose of expending energy or making you tired.  It focuses on today and perhaps a feeling (tired, sore, or getting a pump, etc.), but has no thought of tomorrow.   Our focus at Fenton Fitness is always on training or practicing movements.  The focus is always on the future–reducing injury risk, becoming more durable, performing better at sports or life, or just feeling better.  Our focus is on skill acquisition, not feeling tired.  Just imagine if we treated education the way we treat exercise.  Think of the difficulty of  learning a new subject every day, rarely repeating something, with the sole purpose of making it difficult.  That would be crazy, yet that is more and more of what we see in the fitness industry.  In workouts, exercises tend to change just for the sake of changing.  In training, the movements are not random and serve a direct purpose, and are therefore performed for a minimum of 3-4 weeks.  We progress these movements by performing them with more control, increasing the number of sets or reps, increasing load, or reducing rest intervals.  Here are some benchmarks that we like to use with some basic exercises to do before progressing on to the next movement.

Jeff Tirrell, CSCS, CSFC, Pn1

Carries, Crawls, and Core

Push Up Position Plank: Goal of 1 minute

Plank: Goal of 30 seconds

Side Plank: Goal of 30 seconds/side

Side Plank w/ outside foot elevated: Goal of 30 seconds/side

Side Plank w/ inside leg elevated: Goal of 30 seconds/side

Anterior Baby Crawl: goal of 15 yards with stable torso

Anterior Crawl: Goal of 30 yards with stable torso

Farmers Walk: Goal of 60 yards with body weight

Turkish Get Up (¼): Goal of 8/6kg (men/women) for 10 reps/side

Turkish Get Up (½): Goal of 10/12kg (men/women) for 6 reps/side

Turkish Get Up (full): Goal of 25% body weight for 4 reps/side.

See video demonstration of these exercises here: https://youtu.be/5OkXbOWx4mw

Progression Know How

Vertical Pull Patterns

If I could kill a word it would be “workout”.  People who are into fitness love to talk about working out, but seldom do you hear people talk about training or practicing movements.  “Workout” tends to infer any form of structured exercise with the sole purpose of expending energy or making you tired.  It focuses on today and perhaps a feeling (tired, sore, or getting a pump, etc.), but has no thought of tomorrow.   Our focus at Fenton Fitness is always on training or practicing movements.  The focus is always on the future–reducing injury risk, becoming more durable, performing better at sports or life, or just feeling better.  Our focus is on skill acquisition, not feeling tired.  Just imagine if we treated education the way we treat exercise.  Think of the difficulty of  learning a new subject every day, rarely repeating something, with the sole purpose of making it difficult.  That would be crazy, yet that is more and more of what we see in the fitness industry.  In workouts, exercises tend to change just for the sake of changing.  In training, the movements are not random and serve a direct purpose, and are therefore performed for a minimum of 3-4 weeks.  We progress these movements by performing them with more control, increasing the number of sets or reps, increasing load, or reducing rest intervals.  Here are some benchmarks that we like to use with some basic exercises to do before progressing on to the next movement.

Jeff Tirrell, CSCS, CSFC, Pn1

Vertical Pull Patterns

X Pulldowns: Goal of 50% bodyweight for 10 reps

Isometric Pull/Chin up holds: Goal of holding for 1 minute at both the top and bottom position

Eccentric Pull/Chin ups: Goal of 10 eccentric reps with a 3-5 second descent

Pull/Chin ups: Goal of 10/5 reps (men/women)

See video demonstration at: https://youtu.be/Xidv7HlNtWE

 

Progression Know How

Horizontal Pull Patterns

If I could kill a word it would be “workout”.  People who are into fitness love to talk about working out, but seldom do you hear people talk about training or practicing movements.  “Workout” tends to infer any form of structured exercise with the sole purpose of expending energy or making you tired.  It focuses on today and perhaps a feeling (tired, sore, or getting a pump, etc.), but has no thought of tomorrow.   Our focus at Fenton Fitness is always on training or practicing movements.  The focus is always on the future–reducing injury risk, becoming more durable, performing better at sports or life, or just feeling better.  Our focus is on skill acquisition, not feeling tired.  Just imagine if we treated education the way we treat exercise.  Think of the difficulty of  learning a new subject every day, rarely repeating something, with the sole purpose of making it difficult.  That would be crazy, yet that is more and more of what we see in the fitness industry.  In workouts, exercises tend to change just for the sake of changing.  In training, the movements are not random and serve a direct purpose, and are therefore performed for a minimum of 3-4 weeks.  We progress these movements by performing them with more control, increasing the number of sets or reps, increasing load, or reducing rest intervals.  Here are some benchmarks that we like to use with some basic exercises to do before progressing on to the next movement.

Jeff Tirrell, CSCS, CSFC, Pn1

Horizontal Pull Patterns

TRX Row: Goal 45 degree angle for 10 reps

One Arm DB Row: Goal of 50% bodyweight for 10 reps per arm

Inverted TRX Rows: Goal of 10 reps with full range of motion

Watch Jeff demonstrate these exercises: View Video

Progression Know How

Vertical Press Patterns

If I could kill a word it would be “workout”.  People who are into fitness love to talk about working out, but seldom do you hear people talk about training or practicing movements.  “Workout” tends to infer any form of structured exercise with the sole purpose of expending energy or making you tired.  It focuses on today and perhaps a feeling (tired, sore, or getting a pump, etc.), but has no thought of tomorrow.   Our focus at Fenton Fitness is always on training or practicing movements.  The focus is always on the future–reducing injury risk, becoming more durable, performing better at sports or life, or just feeling better.  Our focus is on skill acquisition, not feeling tired.  Just imagine if we treated education the way we treat exercise.  Think of the difficulty of  learning a new subject every day, rarely repeating something, with the sole purpose of making it difficult.  That would be crazy, yet that is more and more of what we see in the fitness industry.  In workouts, exercises tend to change just for the sake of changing.  In training, the movements are not random and serve a direct purpose, and are therefore performed for a minimum of 3-4 weeks.  We progress these movements by performing them with more control, increasing the number of sets or reps, increasing load, or reducing rest intervals.  Here are some benchmarks that we like to use with some basic exercises to do before progressing on to the next movement.

Jeff Tirrell, CSCS, CSFC, Pn1

Vertical Press Patterns

Tall Kneeling Bilateral Landmine Press- Goal of 45# for 10 reps (men), 25# for 10 reps (women)

½ Kneeling 1 arm Landmine Press- Goal of 45# for 5 reps/arm (men), 25# for 5 reps/arm (women)

½ Kneeling 1 arm KB Overhead Press- Goal of 20kg for 5 reps/arm (men), 12kg for 5 reps/arm (women)

Standing 1 arm DB/KB Overhead Press- Goal of 25% bodyweight for 10 reps/arm

Barbell Overhead Press- Goal of bodyweight for 1 rep (men), or 75% bodyweight for 1 rep (women)

Watch Jeff demonstrate these exercises: View Video

Progression Know How

Horizontal Press Patterns

If I could kill a word it would be “workout”.  People who are into fitness love to talk about working out, but seldom do you hear people talk about training or practicing movements.  “Workout” tends to infer any form of structured exercise with the sole purpose of expending energy or making you tired.  It focuses on today and perhaps a feeling (tired, sore, or getting a pump, etc.), but has no thought of tomorrow.   Our focus at Fenton Fitness is always on training or practicing movements.  The focus is always on the future–reducing injury risk, becoming more durable, performing better at sports or life, or just feeling better.  Our focus is on skill acquisition, not feeling tired.  Just imagine if we treated education the way we treat exercise.  Think of the difficulty of  learning a new subject every day, rarely repeating something, with the sole purpose of making it difficult.  That would be crazy, yet that is more and more of what we see in the fitness industry.  In workouts, exercises tend to change just for the sake of changing.  In training, the movements are not random and serve a direct purpose, and are therefore performed for a minimum of 3-4 weeks.  We progress these movements by performing them with more control, increasing the number of sets or reps, increasing load, or reducing rest intervals.  Here are some benchmarks that we like to use with some basic exercises to do before progressing on to the next movement.

Jeff Tirrell, CSCS, CSFC, Pn1

Horizontal Press Patterns

Push Ups- Goal of 20/10 reps (male/female) with chest touching floor.

Alternating DB Bench Press- Goal of 50% body weight per arm for 5 reps/arm (men) or 33% body weight per arm for 5 reps/arm (women).

Bench Press- Goal of 75% bodyweight (women) or bodyweight (men) for 3-5 reps

See video demonstration of these exercises here: View Video

Functional Stability

The last twenty years have brought about many changes in the fitness industry as our understanding of functional anatomy and evidence based training grows.  Some of these changes have been taken too far, misunderstood, or poorly applied such as stability training. When I was introduced to weights in 1998, exercise programs were built around machines which offer very little carry over to stability, core strength, and function.  Machine based training fails to maximally improve balance/stability, prevent injury, or maximize performance.  Enter functional fitness.  This concept has been popularized by strength coaches and physical therapists such as Eric Cressey, Dan John, Mike Boyle, Grey Cook, and Fenton Fitness owner, Mike O’Hara who saw a gap in training methods and optimal coaching.  Functional training includes better core stability/lumbopelvic control and more unilateral (single limb) exercises that closely mimic human movement. Unfortunately, as with many concepts in the fitness industry, this trend has been taken too far.

Many have latched onto “functional” fitness and incorporated unstable surfaces to challenge the small stabilizing musculature. This gives the illusion of strength and function, but as world renowned strength coach Mark RIppetoe says, these are simply “balance tricks”.  Real life doesn’t involve unstable surfaces like wobble boards, bosu balls, physioballs, etc.  This type of training highly restricts the amount of work the primary movers of the body can do, and doesn’t allow for strength adaptation to occur which should be a primary focus of any solid fitness program.

This Functional Stability series will address the best ways to improve real world function and strength while reducing injury.

Jeff Tirrell, CSCS, CSFC, Pn1

Lower Body

Split Squat

To set up for the split squat, put one foot in front of the other with the heel of the back foot off the ground. 85% of the weight should be on the front foot. An airex pad can be placed under the body for the knee to come down on when lowering to the floor. When in the bottom position of the exercise, the front knee should be in line with the toe creating a slight shin angle. Make sure to push through the front heel on the way up instead of the toe. This exercise can be made easier by holding onto a railing, or can be made harder by adding weight such as a kettlebell in a goblet hold. The split squat displays greater hamstring, external oblique, and gluteus medius muscle activity than the back squat, but less quadriceps muscle activity.

RFE Split Squat: RFE stands for “rear foot elevated”. With this variation of the split squat, set up with the back foot elevated on a bench or a padded stand created for this exercise. An airex pad can be used under the knee if necessary. Squat down, touching the knee to the floor or airex pad.  When in this bottom position, the shin angle should be angled forward just as before, not straight up and down. Common errors include sitting too far back on the rear foot, touching the glute to the heel, or the back foot can tend to roll off the padded stand on the way up and move more onto the shin. Avoid this by putting more weight into the front leg and dropping the knee straight down instead of back. This exercise can be made more difficult by adding dumbbells in each hand, a kettlebell in the goblet, racked, or double racked position, or a barbell in the front or back position. Make sure to descend slowly, creating an eccentric load instead of dropping down fast.

FOB Hip Lift: FOB stands for “feet on ball”. Lay on the floor or table on your back and place the arms out to the side. Push down into the floor with the arms to stabilize the body. Keep the feet together and brace your abdominal muscles. Use the glutes and hamstrings to lift yourself up off the floor, making sure to keep everything tight at the top of the movement. Hold 3-10 seconds at the top and lower slowly and controlled. You can remove the arms from the floor and rest them on your stomach or behind your head to create more of a challenge.

One Leg FOB Hip Lift: Same setup as before except one leg will be used. The other leg will be pointed up to the ceiling as the other presses into the ball to lift the body. This creates more of a stability challenge.

FOB Leg Curl: This variation starts out just like the FOB hip lift, except at the top of the movement when the body is raised, the knees are bent and the ball is pulled in towards the body creating more work for the hamstrings. Keep the hips extended by activating the glutes and moving the hips upward, avoiding the tendency to bend at the hips. It should look like your hips move up and then return to a straight body position.

One Leg FOB Leg Curl: The hardest variation for the FOB series is the one leg curl. Use one leg instead of two, extending the other leg up to the ceiling. Make sure to still avoid bending at the hips in this variation as well.

One Leg Deadlift: When starting out with this exercise, it is best to just use bodyweight. Stand with 95% of your weight on one leg. Extend the arms and free leg out to a “T” position, bending the standing leg slightly. The extended leg should be reaching backwards as far as it can go.  Think about sitting into that hip just as you would during deadlifts. As this exercise becomes easier and balance is not an issue, it can be progressed by holding a kettlebell. The kettlebell should be held in the same side as the leg extending back. Reach the kettlebell straight down by the big toe; the weight should not go in front of the toe but rather by the instep of the foot. If you have progressed pass the kettlebell, two kettlebells can be used or a barbell with weight. The primary muscles being used in this exercise are the posterior leg muscles including the glutes and hamstrings.

One Leg Squat: Stand in front of a 12-18” box (start higher, and work your way to a lower box).  You will want to have 5-10# of weight to use as a counter balance (dumbbell, plate, or med ball).  Standing on only one leg, slowly lower yourself to the box.  As you descend, reach forward with the weight to help with balance.  Control the descent until your butt taps the box and then stand back up.  Work for 3-12 reps before switching legs.  Over time, try to get to a lower box so that your hip is slightly below your knee at the bottom position.

Watch video of these exercises: https://youtu.be/SqFqf81UnIk

 

 

 

 

Functional Stability

The last twenty years have brought about many changes in the fitness industry as our understanding of functional anatomy and evidence based training grows.  Some of these changes have been taken too far, misunderstood, or poorly applied such as stability training. When I was introduced to weights in 1998, exercise programs were built around machines which offer very little carry over to stability, core strength, and function.  Machine based training fails to maximally improve balance/stability, prevent injury, or maximize performance.  Enter functional fitness.  This concept has been popularized by strength coaches and physical therapists such as Eric Cressey, Dan John, Mike Boyle, Grey Cook, and Fenton Fitness owner, Mike O’Hara who saw a gap in training methods and optimal coaching.  Functional training includes better core stability/lumbopelvic control and more unilateral (single limb) exercises that closely mimic human movement. Unfortunately, as with many concepts in the fitness industry, this trend has been taken too far.

Many have latched onto “functional” fitness and incorporated unstable surfaces to challenge the small stabilizing musculature. This gives the illusion of strength and function, but as world renowned strength coach Mark RIppetoe says, these are simply “balance tricks”.  Real life doesn’t involve unstable surfaces like wobble boards, bosu balls, physioballs, etc.  This type of training highly restricts the amount of work the primary movers of the body can do, and doesn’t allow for strength adaptation to occur which should be a primary focus of any solid fitness program.

This Functional Stability series will address the best ways to improve real world function and strength while reducing injury.

Jeff Tirrell, CSCS, CSFC, Pn1

Vertical Pulls

Just like the vertical press exercises, vertical pulls can be hard to execute due to their mobility requirements, but are the most effective and efficient movements when trying to build a strong and healthy upper body. The broadest posterior chain muscle in the body, the latissimus dorsi, has the primary actions of humeral adduction, extension and internal rotation, but also contributes to posture due to its attachment points. Vertical pulls also work the arms (brachioradialis, biceps brachii, triceps long head), shoulders/back (trapezius, posterior deltoid, teres major, rhomboids), and pelvic floor (rectus abdominis, internal and external obliques).

Pull Up/Chin Up: Pull ups/chin ups work the majority of the muscles in the mid/upper back and flexors of the arm. The rotator cuff muscles and core musculature play a more stabilizing role.  In both variations, think about keeping the core engaged.  There should not be extension in the lower back and if there is, you will notice yourself swinging back and forth during reps. When pulling up, think about leading with your collarbone and actually touching it to the bar. Another useful cue is to think about pulling the elbows to your pockets. Avoid rounding the upper back over the bar when reaching the top of the movement.  If you are having trouble touching your chest to the bar, it is either a strength or mobility issue.

½ Kneeling One Arm Pull Down
Set up at the Cybex machine or any cable hook up. Grab just one handle and put that same side knee down on the ground with the toe dug in.  Make sure the arm is angled in such a way that you have to reach across your body when the arm is flexed overhead. Your palm should be facing forward, and as you pull down, turn the hand towards the body and keep the elbow close to your side. Concentrate on squeezing the muscles in the back and keeping the rest of the body still with the core braced. Switch legs when you switch arms.

View video of vertical pulls here: https://youtu.be/knAFry9p-LM.

Functional Stability

The last twenty years have brought about many changes in the fitness industry as our understanding of functional anatomy and evidence based training grows.  Some of these changes have been taken too far, misunderstood, or poorly applied such as stability training. When I was introduced to weights in 1998, exercise programs were built around machines which offer very little carry over to stability, core strength, and function.  Machine based training fails to maximally improve balance/stability, prevent injury, or maximize performance.  Enter functional fitness.  This concept has been popularized by strength coaches and physical therapists such as Eric Cressey, Dan John, Mike Boyle, Grey Cook, and Fenton Fitness owner, Mike O’Hara who saw a gap in training methods and optimal coaching.  Functional training includes better core stability/lumbopelvic control and more unilateral (single limb) exercises that closely mimic human movement. Unfortunately, as with many concepts in the fitness industry, this trend has been taken too far.

Many have latched onto “functional” fitness and incorporated unstable surfaces to challenge the small stabilizing musculature. This gives the illusion of strength and function, but as world renowned strength coach Mark RIppetoe says, these are simply “balance tricks”.  Real life doesn’t involve unstable surfaces like wobble boards, bosu balls, physioballs, etc.  This type of training highly restricts the amount of work the primary movers of the body can do, and doesn’t allow for strength adaptation to occur which should be a primary focus of any solid fitness program.

This Functional Stability series will address the best ways to improve real world function and strength while reducing injury.

Jeff Tirrell, CSCS, CSFC, Pn1

Horizontal Pulls

A horizontal pulling exercise is any exercise that involves moving a weight in towards your torso horizontally from straight out in front of you. A good exercise routine should incorporate both pushing and pulling movements in order to keep a healthy balance, better posture, and prevention of shoulder injuries. Muscles involved in pulling exercises include biceps, latissimus dorsi, rhomboids, posterior deltoid, and middle trapezius.

Arm DB Row
There are a couple different variations that could be done with the one arm row. In the first and most common variation, set up with one dumbbell and put the opposite hand and knee on a flat bench. The back should be flat and the weighted arm should be straight with full extension in the shoulder. Keeping the core braced, bring the dumbbell straight up to the side of your chest, keeping your upper arm close to your side. Concentrate on squeezing the back muscles once you reach the full contracted position. In the second variation, we are going to get a little more athletic and functional. It is called three stance row, or straddle stance row. Stand with the legs a little wider than shoulder width apart. Bend the knees slightly and make sure the feet are equally distributed and the back is flat (think linebacker).  Put one arm on the end of the bench or a 16-20” box. The hand with the dumbbell should be directly under the shoulder and centered. Row as described previously.

PUPP DB Row
Set up with two dumbbells in a push-up position plank. Keep the feet further apart to make the exercise easier, keep feet closer together to make it harder. Pull up one dumbbell, keeping the elbow close to the body and avoiding the tendency to dip the opposite hip. The body should stay still throughout the exercise. This variation is going to challenge the core as well as the rowing muscle groups. Alternate arms.

Horse Stance DB Row
This variation of the DB row is going to be more challenging than just a regular row as it is going to test your core stability and balance. Set up with one dumbbell and a bench. Put the opposite hand and knee on the bench and extend the free leg out horizontally, with the ankle dorsiflexed. The other arm is holding the dumbbell straight down as with any other row variation. Keeping the core braced, bring up the dumbbell in the same pattern as previously stated. Avoid the tendency to dip the opposite hip down. The weight used in this variation is going to be lighter than usual.

View the video here: https://youtu.be/gSMvrJGVeN4

Olympic Lifts–Do We Really Need Them?

Hang Snatch

 

Over the last several years, Olympic lifting movements have made a comeback into many gyms.  The primary reason to use Olympic lifts is to improve/maximize power output, or Rate of Force Development (RFD); however, the general fitness population lacks the requisite mobility and stability to safely get into the required positions to perform these exercises.  Over the next several weeks, I will introduce thirteen exercises that you can use instead to maximize speed, power, and RFD with less risk of injury, less technical skill required, and more efficiency.  Today’s exercise is the Hang Snatch.  Watch the video, give it a try, and let us know how you do. View the video here: https://youtu.be/TrOhhKLIpqA.

The Hang Snatch, like the Hang Clean, is a better, easier option to learn than the full Snatch or Power Snatch.  Again, you start from the standing position.  We teach the Hang Snatch with a Hang Clean grip.  The traditional grip of the Snatch is much wider and places much more stress on the shoulders.  It is done to reduce the distance the bar must travel so you can increase the load you are able to use.  If you are not competing in Weightlifting, however, this doesn’t matter.  Once you are ready for the Hang Snatch and have the required shoulder mobility (can you touch your fingers behind your back?), it is the best power movement out there. The lighter loads used on this exercise compared to the Hang Clean make it an even friendlier exercise on your spine and the longer bar path requires more power output.

-Jeff Tirrell, CSCS, CFSC, Pn1

 

Olympic Lifts–Do We Really Need Them?

Hang Clean

Over the last several years, Olympic lifting movements have made a comeback into many gyms.  The primary reason to use Olympic lifts is to improve/maximize power output, or Rate of Force Development (RFD); however, the general fitness population lacks the requisite mobility and stability to safely get into the required positions to perform these exercises.  Over the next several weeks, I will introduce thirteen exercises that you can use instead to maximize speed, power, and RFD with less risk of injury, less technical skill required, and more efficiency.  Today’s exercise is the Hang Clean.  Watch the video, give it a try, and let us know how you do.  See the video here: https://youtu.be/KupitKep6Lk

The problem with the traditional Clean and Power Clean is that many people have trouble getting into a good position to start the movement.  The Hang Clean eliminates this problem by starting from the standing position.  It only requires a small amount of hip movement, yet still produces a great deal of power.  A good goal for your hang clean is to do the same amount of weight as your 1 rep max bench press.  If you can’t get there, you need more cleans and less bench work.

-Jeff Tirrell, CSCS, CFSC, Pn1

 

Categories