(810) 750-1996 PH
Fenton Fitness (810) 750-0351 PH
Fenton Physical Therapy (810) 750-1996 PH
Linden Physical Therapy (810) 735-0010 PH
Milford Physical Therapy (248) 685-7272 PH

Learn more about Rehab, Sports Medicine & Performance

Palloff

Real Core Training Part Four

Anti-Rotation

Like everything in the fitness world, core training has evolved.  When I bought my first bodybuilding magazine in the late 90s, the word “core” wasn’t even used.  Instead, you would find ab workouts, oblique workouts, and sometime, low back workouts.  Like pretty much everything in the 90s, muscles were trained in isolation with little concern for how the musculoskeletal system was designed to function as a unit.  We have come a long way in our understanding of physiology, biomechanics, and injury prevention/reduction.

The core used to be trained and often still is through movement: flexion (anterior), lateral flexion, extension, and rotation.  Sit ups, crunches, side bends, and Russian twists aim to strengthen the muscles concentrically and eccentrically.  These build mass and thickness to the core musculature.  The second way we train the core is to recognize it as a stabilizer of the low back and hips.  This involves training this musculature to resist movement.  When it comes to increasing strength, power, speed, and reducing injury, this training is more important than dynamically training the core.  This style of training is referred to as “anti-core training” because we are resisting flexion, extension, lateral flexion, and rotation.  The other benefit of anti-core training is that it involves isometric contractions which are much less likely to create muscle hypertrophy, which individuals typically don’t want in their waist.  I typically recommend that 70-90% of your core training consist of anti-core work depending on your health/injury history and goals.

The key to good core training is understanding what you are trying to accomplish, as well as how to progress or regress the movement.  Here are the some of our favorites that we use at Fenton Fitness for each of the four anti-core categories.

Jeff Tirrell, CSCS, CSFC, Pn1

Anti-Rotation

Tall Kneeling Pallof Press: Grab some elastic tubing or a cable (anchored to something sturdy) and assume a tall kneeling position.  Hold with both hands and press outward away from body.  Do not allow your body to twist or rotate.  Increase load or stretch on tubing to increase difficulty.  Work up to 12 reps per side.

Half Kneeling Pallof Press: Set up in a half kneeling position.  Use the same execution as the tall kneeling version.  Make sure that you don’t allow your legs/hips to lean or twist.  Work up to 12 reps per side.

Standing Pallof Press: Assume an athletic stance with your feet just outside of shoulder width, slight bend in the knees, and slightly flexed at the hips.  Execute the same movement as you would for the tall or half kneeling Pallof press. Work up to 12 reps per side.

One Leg Pallof Press: Stand on one leg with the other leg flexed at 90 degrees at the foot, knee, and hip.  Execute the Pallof press the same way as the standing Pallof press. This is a much more a balance and overall body stability drill.  Tension/resistance will need to be reduced.  Be slow and gradual with your increases in load, volume, or frequency to allow your knee time to adapt.  Work up to 12 reps per side.

PUPP with alternating arm raise:  Assume a push up position with your feet slightly wider than shoulder width.  Raise one arm out in front of your body while maintaining spine and pelvic positions.  A wider feet position makes the movement more stable and easier, while a narrower foot position increases difficulty.  You can also slow the movement to increase difficulty.  Remember, top priority is no hip/spine movement before trying to increase difficulty.  Work up to 10 per side.

Landmine Anti-Rotations:  Place a barbell in a landmine and assume an athletic position.  Press the landmine away from your body and slowly make a rainbow arching pattern moving the barbell from one hip to the other.  Make sure that only your shoulder/elbow joints move, everything else stays stiff.  Work up to 10 reps per side.

Crawl: Get on your hands and knees with your toes dug into the ground.  Lift your knees slightly off the ground.  Keeping your back flat and stable, move your opposite hand and foot to crawl forward or backward.  Work up to 50 yards.

For video demonstration of these exercises, click here

Real Core Training Part Three

Anti-Extension

Like everything in the fitness world, core training has evolved.  When I bought my first bodybuilding magazine in the late 90s, the word “core” wasn’t even used.  Instead, you would find ab workouts, oblique workouts, and sometime, low back workouts.  Like pretty much everything in the 90s, muscles were trained in isolation with little concern for how the musculoskeletal system was designed to function as a unit.  We have come a long way in our understanding of physiology, biomechanics, and injury prevention/reduction.

The core used to be trained and often still is through movement: flexion (anterior), lateral flexion, extension, and rotation.  Sit ups, crunches, side bends, and Russian twists aim to strengthen the muscles concentrically and eccentrically.  These build mass and thickness to the core musculature.  The second way we train the core is to recognize it as a stabilizer of the low back and hips.  This involves training this musculature to resist movement.  When it comes to increasing strength, power, speed, and reducing injury, this training is more important than dynamically training the core.  This style of training is referred to as “anti-core training” because we are resisting flexion, extension, lateral flexion, and rotation.  The other benefit of anti-core training is that it involves isometric contractions which are much less likely to create muscle hypertrophy, which individuals typically don’t want in their waist.  I typically recommend that 70-90% of your core training consist of anti-core work depending on your health/injury history and goals.

The key to good core training is understanding what you are trying to accomplish, as well as how to progress or regress the movement.  Here are the some of our favorites that we use at Fenton Fitness for each of the four anti-core categories.

Jeff Tirrell, CSCS, CSFC, Pn1

Anti-Exension

Supine Bent Knee March

Lay on your back and lift your legs off the ground with your knees and hips at 90 degree angles.  Posteriorly tilt your hips so that your low back is pressed firmly into the ground.  Slowly lower one heel to the ground keeping your knee at 90 degrees and not allowing your low back to lift off the floor.  Bring this leg back up and repeat on the other side.  Work up to 10 reps per side.

Bent Leg Dead Bug

Assume the same position as the previous exercise.  Reach your arms straight up to the ceiling.  Keep your low back pressed into the floor and straighten one leg, getting the heel as close to the ground as possible without touching.  Simultaneously reach the opposite arm overhead without quite touching the ground.

Straight Leg Dead Bug

Lay on your back with your legs and arms all reaching up toward the ceiling.  Keep your leg straight. and slowly lower it toward the ground while simultaneously reaching overhead with the opposite arm.  Don’t allow your foot or arm to rest on the ground, and keep your low back pressed into the floor.

Hollow Body Hold

Lay on your back and press your low back into the floor.  Lift your feet, shoulders, and arms off the floor, keeping your low back pressed into the floor.  Keep your feet and arms as close to the ground as possible while also keeping your low back on the ground.  Hold for up to 60 seconds.

Plank

Lay on your stomach and place your elbows under your shoulders.  Put your feet together and lift your hips off the ground.  Maintain neutral lumbar, thoracic, and cervical spine positions. Contract your glutes, pull your ribs down with a forceful exhalation, and try to pull your elbows toward your toes (they won’t actually move) to engage your lats.  Try to create maximum full body tension.  Hold for up to 30 seconds.

Long Lever Plank

Use the same set up and execution as the plank, except that the elbows will be farther out in front of the shoulders.  The farther forward the elbows, the harder this will be.  Work up to 30 seconds.

Body Saw

Use the set up the same as the plank only with carpet sliders under your toes.  Use your shoulders to slide yourself into the long lever position and then slide back.  Make sure you maintain spinal and pelvis positioning during the whole movement.  Work up to 12 reps.

Physioball Rollouts

Start in a tall kneeling position with a Physioball at arm’s length in front of you.  Pull your ribs down and engage your glutes.  Allow your body to fall forward by letting your hands and forearms roll up onto the ball.  Once you feel you are going to break lumbopelvic positioning, reverse the movement to get you back to your starting position.  Work up to 10 reps.

TRX Fallouts

Use the same set up as with the physioball, but use a suspension trainer instead.  Set up with straps at mid-thigh height.  Execute in the same manner.  Lower the strap starting position to increase difficulty.  Work up to 10 reps.

Ab Wheel/Dolly Rollouts

Set up on your knees with your hands on an ab wheel or dolly and place your hands directly under your shoulders.  Begin to fall forward by flexing the shoulder (overhead) and extending the hips.  Go forward as far as possible without losing spinal positioning and then reverse movement back to the start.  Make sure shoulder and hip joints extend/flex at the same speed.

For video demonstration of these exercises, click here

Real Core Training Part Two

Anti-Lateral Flexion

Like everything in the fitness world, core training has evolved.  When I bought my first bodybuilding magazine in the late 90s, the word “core” wasn’t even used.  Instead, you would find ab workouts, oblique workouts, and sometime, low back workouts.  Like pretty much everything in the 90s, muscles were trained in isolation with little concern for how the musculoskeletal system was designed to function as a unit.  We have come a long way in our understanding of physiology, biomechanics, and injury prevention/reduction.

The core used to be trained and often still is through movement: flexion (anterior), lateral flexion, extension, and rotation.  Sit ups, crunches, side bends, and Russian twists aim to strengthen the muscles concentrically and eccentrically.  These build mass and thickness to the core musculature.  The second way we train the core is to recognize it as a stabilizer of the low back and hips.  This involves training this musculature to resist movement.  When it comes to increasing strength, power, speed, and reducing injury, this training is more important than dynamically training the core.  This style of training is referred to as “anti-core training” because we are resisting flexion, extension, lateral flexion, and rotation.  The other benefit of anti-core training is that it involves isometric contractions which are much less likely to create muscle hypertrophy, which individuals typically don’t want in their waist.  I typically recommend that 70-90% of your core training consist of anti-core work depending on your health/injury history and goals.

The key to good core training is understanding what you are trying to accomplish, as well as how to progress or regress the movement.  Here are the some of our favorites that we use at Fenton Fitness for each of the four anti-core categories.

Jeff Tirrell, CSCS, CSFC, Pn1

Anti-Lateral Flexion

Bent Knee Side Plank

Lay on your side and place your elbow under your shoulder and line your knees up below your hips.  Lift your hips off the ground and hold.  Work up to 45 seconds.

Side Plank

Lay on your side and place your elbow under your shoulder and straighten your legs out.  Stack your legs on top of each other and lift your hips off the ground.  Hold for up to 60 seconds.

Side Plank with Top Leg Elevated

Position yourself in the same set up as the side plank.  Once your hips are lifted off the ground, you will move your top leg away from the bottom leg.  Make sure that you don’t flex either hip when raising the top leg.  Work up to 30 seconds.

Side Plank with Top Leg on Bench

Lay on your side and place your elbow under your shoulder.  Place your top leg on top of a bench.  Lift your hips off the ground.  The bottom leg can squeeze the bottom of the bench or dangle in the air.

Suitcase Hold

Grab a KB/DB in one hand, stand tall, and maintain a neutral lumbar, thoracic, and cervical spine position. Make sure your shoulder blades stay down and back.  If possible, watch yourself in the mirror to ensure you aren’t leaning.  Hold for up to 60 seconds.

Suitcase Carry

Assume the same set up as the suitcase hold.  Start walking with a normal gait.  Make sure to not lean excessively.  Start with 20 yards per side and work up to 100 yards.

For video demonstration of these exercises, click here

Categories